Dinic’s algorithm for Maximum Flow

Problem Statement :


Given a graph which represents a flow network where every edge has a capacity. Also given two vertices source ‘s’ and sink ‘t’ in the graph, find the maximum possible flow from s to t with following constraints :
  1. Flow on an edge doesn’t exceed the given capacity of the edge.
  2. Incoming flow is equal to outgoing flow for every vertex except s and t.
    For example, in following input graph,



    the maximum s-t flow is 19 which is shown below.

    Background :
    1. Max Flow Problem Introduction : We introduced Maximum Flow problem, discussed Greedy Algorithm and introduced residual graph.
    2. Ford-Fulkerson Algorithm and Edmond Karp Implementation : We discussed Ford-Fulkerson algorithm and its implementation. We also discussed residual graph in detail.
    Time complexity of Edmond Karp Implementation is O(VE2). In this post, a new Dinic’s algorithm is discussed which is a faster algorithm and takes O(EV2).
    Like Edmond Karp’s algorithm, Dinic’s algorithm uses following concepts :




    1. A flow is maximum if there is no s to t path in residual graph.
    2. BFS is used in a loop. There is a difference though in the way we use BFS in both algorithms.
    In Edmond’s Karp algorithm, we use BFS to find an augmenting path and send flow across this path. In Dinic’s algorithm, we use BFS to check if more flow is possible and to construct level graph. In level graph, we assign levels to all nodes, level of a node is shortest distance (in terms of number of edges) of the node from source. Once level graph is constructed, we send multiple flows using this level graph. This is the reason it works better than Edmond Karp. In Edmond Karp, we send only flow that is send across the path found by BFS.
    Outline of Dinic’s algorithm :
    1) Initialize residual graph G as given graph.
    1) Do BFS of G to construct a level graph (or
       assign levels to vertices) and also check if 
       more flow is possible.
        a) If more flow is not possible, then return.
        b) Send multiple flows in G using level graph 
           until blocking flow is reached. Here using 
           level graph means, in every flow,
           levels of path nodes should be 0, 1, 2...
           (in order) from s to t. 
    A flow is Blocking Flow if no more flow can be sent using level graph, i.e., no more s-t path exists such that path vertices have current levels 0, 1, 2… in order. Blocking Flow can be seen same as maximum flow path in Greedy algorithm discussed discussed here.
    Illustration :
    Initial Residual Graph (Same as given Graph)



    Total Flow = 0
    First Iteration : We assign levels to all nodes using BFS. We also check if more flow is possible (or there is a s-t path in residual graph).

    Now we find blocking flow using levels (means every flow path should have levels as 0, 1, 2, 3). We send three flows together. This is where it is optimized compared to Edmond Karp where we send one flow at a time.







    4 units of flow on path s – 1 – 3 – t.

    6 units of flow on path s – 1 – 4 – t.

    4 units of flow on path s – 2 – 4 – t.

    Total flow = Total flow + 4 + 6 + 4 = 14
    After one iteration, residual graph changes to following.



    Second Iteration : We assign new levels to all nodes using BFS of above modified residual graph. We also check if more flow is possible (or there is a s-t path in residual graph).



    Now we find blocking flow using levels (means every flow path should have levels as 0, 1, 2, 3, 4). We can send only one flow this time.

    5 units of flow on path s – 2 – 4 – 3 – t

    Total flow = Total flow + 5 = 19
    The new residual graph is

    Third Iteration : We run BFS and create a level graph. We also check if more flow is possible and proceed only if possible. This time there is no s-t path in residual graph, so we terminate the algorithm.

    Implementation:

    Below is c++ implementation of Dinic’s algorithm:




    1
      2
      3
      4
      5
      6
      7
      8
      9
     10
     11
     12
     13
     14
     15
     16
     17
     18
     19
     20
     21
     22
     23
     24
     25
     26
     27
     28
     29
     30
     31
     32
     33
     34
     35
     36
     37
     38
     39
     40
     41
     42
     43
     44
     45
     46
     47
     48
     49
     50
     51
     52
     53
     54
     55
     56
     57
     58
     59
     60
     61
     62
     63
     64
     65
     66
     67
     68
     69
     70
     71
     72
     73
     74
     75
     76
     77
     78
     79
     80
     81
     82
     83
     84
     85
     86
     87
     88
     89
     90
     91
     92
     93
     94
     95
     96
     97
     98
     99
    100
    101
    102
    103
    104
    105
    106
    107
    108
    109
    110
    111
    112
    113
    114
    115
    116
    117
    118
    119
    120
    121
    122
    123
    124
    125
    126
    127
    128
    129
    130
    131
    132
    133
    134
    135
    136
    137
    138
    139
    140
    141
    142
    143
    144
    145
    146
    147
    148
    149
    150
    151
    152
    153
    154
    155
    156
    157
    158
    159
    160
    161
    162
    163
    164
    165
    166
    167
    168
    169
    170
    171
    172
    173
    174
    175
    176
    177
    178
    179
    180
    181
    182
    183
    184
    185
    186
    187
    188
    189
    190
    191
    192
    193
    194
    195
    196
    197
    198
    199
    200
    201
    202
    203
    204
    205
    206
    207
    208
    // C++ implementation of Dinic's Algorithm 
    #include<bits/stdc++.h> 
    using namespace std; 
    
    // A structure to represent a edge between 
    // two vertex 
    struct Edge 
    { 
     int v ; // Vertex v (or "to" vertex) 
       // of a directed edge u-v. "From" 
       // vertex u can be obtained using 
       // index in adjacent array. 
    
     int flow ; // flow of data in edge 
    
     int C; // capacity 
    
     int rev ; // To store index of reverse 
       // edge in adjacency list so that 
       // we can quickly find it. 
    }; 
    
    // Residual Graph 
    class Graph 
    { 
     int V; // number of vertex 
     int *level ; // stores level of a node 
     vector< Edge > *adj; 
    public : 
     Graph(int V) 
     { 
      adj = new vector<Edge>[V]; 
      this->V = V; 
      level = new int[V]; 
     } 
    
     // add edge to the graph 
     void addEdge(int u, int v, int C) 
     { 
      // Forward edge : 0 flow and C capacity 
      Edge a{v, 0, C, adj[v].size()}; 
    
      // Back edge : 0 flow and 0 capacity 
      Edge b{u, 0, 0, adj[u].size()}; 
    
      adj[u].push_back(a); 
      adj[v].push_back(b); // reverse edge 
     } 
    
     bool BFS(int s, int t); 
     int sendFlow(int s, int flow, int t, int ptr[]); 
     int DinicMaxflow(int s, int t); 
    }; 
    
    // Finds if more flow can be sent from s to t. 
    // Also assigns levels to nodes. 
    bool Graph::BFS(int s, int t) 
    { 
     for (int i = 0 ; i < V ; i++) 
      level[i] = -1; 
    
     level[s] = 0; // Level of source vertex 
    
     // Create a queue, enqueue source vertex 
     // and mark source vertex as visited here 
     // level[] array works as visited array also. 
     list< int > q; 
     q.push_back(s); 
    
     vector<Edge>::iterator i ; 
     while (!q.empty()) 
     { 
      int u = q.front(); 
      q.pop_front(); 
      for (i = adj[u].begin(); i != adj[u].end(); i++) 
      { 
       Edge &e = *i; 
       if (level[e.v] < 0 && e.flow < e.C) 
       { 
        // Level of current vertex is, 
        // level of parent + 1 
        level[e.v] = level[u] + 1; 
    
        q.push_back(e.v); 
       } 
      } 
     } 
    
     // IF we can not reach to the sink we 
     // return false else true 
     return level[t] < 0 ? false : true ; 
    } 
    
    // A DFS based function to send flow after BFS has 
    // figured out that there is a possible flow and 
    // constructed levels. This function called multiple 
    // times for a single call of BFS. 
    // flow : Current flow send by parent function call 
    // start[] : To keep track of next edge to be explored. 
    //   start[i] stores count of edges explored 
    //   from i. 
    // u : Current vertex 
    // t : Sink 
    int Graph::sendFlow(int u, int flow, int t, int start[]) 
    { 
     // Sink reached 
     if (u == t) 
      return flow; 
    
     // Traverse all adjacent edges one -by - one. 
     for ( ; start[u] < adj[u].size(); start[u]++) 
     { 
      // Pick next edge from adjacency list of u 
      Edge &e = adj[u][start[u]]; 
             
      if (level[e.v] == level[u]+1 && e.flow < e.C) 
      { 
       // find minimum flow from u to t 
       int curr_flow = min(flow, e.C - e.flow); 
    
       int temp_flow = sendFlow(e.v, curr_flow, t, start); 
    
       // flow is greater than zero 
       if (temp_flow > 0) 
       { 
        // add flow to current edge 
        e.flow += temp_flow; 
    
        // subtract flow from reverse edge 
        // of current edge 
        adj[e.v][e.rev].flow -= temp_flow; 
        return temp_flow; 
       } 
      } 
     } 
    
     return 0; 
    } 
    
    // Returns maximum flow in graph 
    int Graph::DinicMaxflow(int s, int t) 
    { 
     // Corner case 
     if (s == t) 
      return -1; 
    
     int total = 0; // Initialize result 
    
     // Augment the flow while there is path 
     // from source to sink 
     while (BFS(s, t) == true) 
     { 
      // store how many edges are visited 
      // from V { 0 to V } 
      int *start = new int[V+1]; 
    
      // while flow is not zero in graph from S to D 
      while (int flow = sendFlow(s, INT_MAX, t, start)) 
    
       // Add path flow to overall flow 
       total += flow; 
     } 
    
     // return maximum flow 
     return total; 
    } 
    
    // Driver program to test above functions 
    int main() 
    { 
     Graph g(6); 
     g.addEdge(0, 1, 16 ); 
     g.addEdge(0, 2, 13 ); 
     g.addEdge(1, 2, 10 ); 
     g.addEdge(1, 3, 12 ); 
     g.addEdge(2, 1, 4 ); 
     g.addEdge(2, 4, 14); 
     g.addEdge(3, 2, 9 ); 
     g.addEdge(3, 5, 20 ); 
     g.addEdge(4, 3, 7 ); 
     g.addEdge(4, 5, 4); 
    
     // next exmp 
     /*g.addEdge(0, 1, 3 ); 
     g.addEdge(0, 2, 7 ) ; 
     g.addEdge(1, 3, 9); 
     g.addEdge(1, 4, 9 ); 
     g.addEdge(2, 1, 9 ); 
     g.addEdge(2, 4, 9); 
     g.addEdge(2, 5, 4); 
     g.addEdge(3, 5, 3); 
     g.addEdge(4, 5, 7 ); 
     g.addEdge(0, 4, 10); 
    
     // next exp 
     g.addEdge(0, 1, 10); 
     g.addEdge(0, 2, 10); 
     g.addEdge(1, 3, 4 ); 
     g.addEdge(1, 4, 8 ); 
     g.addEdge(1, 2, 2 ); 
     g.addEdge(2, 4, 9 ); 
     g.addEdge(3, 5, 10 ); 
     g.addEdge(4, 3, 6 ); 
     g.addEdge(4, 5, 10 ); */
    
     cout << "Maximum flow " << g.DinicMaxflow(0, 5); 
     return 0; 
    } 
    

    Output:

    Maximum flow 23
    
    Time Complexity : O(EV2). Doing a BFS to construct level graph takes O(E) time. Sending multiple more flows until a blocking flow is reached takes O(VE) time. The outer loop runs at-most O(V) time. In each iteration, we construct new level graph and find blocking flow. It can be proved that the number of levels increase at least by one in every iteration (Refer the below reference video for the proof). So the outer loop runs at most O(V) times. Therefore overall time complexity is O(EV2).

    Post a Comment

    5 Comments

    1. Good information mate

      ReplyDelete
    2. Great post, hadn't heard about Dinic's algorithm before.
      Btw, there a typo in the second figure. The in-flow to t is 20, where the upper in-edge should have 9/10.

      ReplyDelete
    3. Nice Article. 123movies Thank you very much for sharing this awesome post with us. Keep Posting.

      ReplyDelete